AD8619WARUZ-R7 Overview

Packaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 2.2mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 152μA, this op amp ic can operate. 113.98dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 4 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 125°C should be used. The linear amplifier consists of 4 different elements in total. The operating supply voltage of the buffer op amp is rated at 3V. As a result, it is recommended that a power supply of 38μA be used with this electronic part. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 5V. A high supply voltage of more than 1.8V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 2.5V volts. As the name implies, Automotive refers to the series of the buffer op amp. Currently, linear amplifier is operating with a quiescent current of 38μA.

AD8619WARUZ-R7 Features

113.98dB voltage gain
Output Type: Rail-to-Rail

AD8619WARUZ-R7 Applications

There are a lot of Analog Devices Inc.
AD8619WARUZ-R7 Instrumentational OP Amps applications.

• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection