AD8634HFZ Overview

The linear amplifier is packaged in a 8-CFlatpack case. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. Buffer amplifier has a total of 8 pins on it. I would like to remind you that this buffer op amp should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 250μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~210°C . As long as the supply current of the chip does not exceed 1.1mA, this op amp ic can operate. It is a member of the 108dB's 108dB family. There are 2 circuits on op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. As a result, linear amplifier's quiescent current is 1.1mA. There are 1 amplifiers on it.

AD8634HFZ Features

8 Pins
supply voltage of 15V
108dB voltage gain
Output Type: Rail-to-Rail

AD8634HFZ Applications

There are a lot of Analog Devices Inc. AD8634HFZ Instrumentational OP Amps applications.

• Portable docking station
• Large motor controllers
• Inverse/same-phase proportional circuit
• Non-polarized electrodes
• Fast A/D and D/A converters
• Multimedia playback equipment
• Differentiator circuits
• Micro signal measurement
• Automation control systems
• Measurements of Wheatstone bridge