It is packaged using the Tape & Reel (TR) method since it is a clock IC. Embedded in the 48-VFQFN Exposed Pad, CSP package is this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. There are 48 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. The input of this clock generator is designed to be CMOS, LVDS, LVPECL. It is possible to access the full performance of the electrical part by implementing 1 circuits. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 2.65GHz. PLL clock is mounted in the way of Surface Mount. Approximately 3.465V is the maximum supply voltage needed by this time clock generator. As far as the supply voltage is concerned, clock PLL can be used with 3.135V~3.465V. The temperature should be set at -40°C~85°C to ensure reliable performance. A frequency synthesizer which is compatible with the CMOS, LVDS, LVPECL logic levels is presented here. This electronic component can be classified as a Clock Generator, Fanout Distribution. In particular, this clock PLL is designed to be used with microprocessors. It is possible to find its related electronic parts by searching for the base part number AD9517. A 48 pin is available on the PLL. There is a maximum supply voltage of 3.3V that clock generator can handle. Clock PLL has 12 signal outputs to maximi12e output frequency. At maximum 0.675 ns, this analog clock generator has low timing skew. Clock logic function Clock are combined with input data in this frequency synthesizer. 2 inputs are employed.
AD9517-1ABCPZ-RL7 Features
Available in the 48-VFQFN Exposed Pad, CSP Supply voltage of 3.3V Operating supply voltage of 3.3V
AD9517-1ABCPZ-RL7 Applications
There are a lot of Analog Devices Inc. AD9517-1ABCPZ-RL7 Clock Generators applications.