Tape & Reel (TR)-method packaging is used for clock ICs. This clock generator is embedded in the 48-VFQFN Exposed Pad, CSP package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. In it, there are 48 terminations to be found. This clock generator ic should receive a voltage of 3.3V. This Clock PLL will be fed by CMOS, LVDS, LVPECL as its input. 1 circuits are used to achieve clock PLL's superior flexibility. An upper frequency limit of 2.25GHz Max can be achieved with this clock-based frequency synthesizer. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.465V for this clock generator. There are 3.135V~3.465V different supply voltages that can be provided for this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with CMOS, LVDS, LVPECL logic levels. As far as this electronic part is concerned, it can be classified as a Clock Generator, Fanout Distribution component. There is a 48-bit clock-generating IC built specifically for microprocessors in this frequency generator. The related electronic parts of part number AD9517 are listed below. The clock PLL has 48 pins that are available. The supply voltage should be maintained at 3.3V for high efficiency. The output frequency can be amplified as high as possible with its 12 signal outputs. There is a low timing skew at 0.675 nsmax with this RF synthesizer. A RF synthesizer that combines logic function Clock for clocks with input data. The time clock generator uses 2 inputs.
AD9517-3ABCPZ-RL7 Features
Available in the 48-VFQFN Exposed Pad, CSP Supply voltage of 3.3V Operating supply voltage of 3.3V
AD9517-3ABCPZ-RL7 Applications
There are a lot of Analog Devices Inc. AD9517-3ABCPZ-RL7 Clock Generators applications.