AD9822JRSZ Overview

Sensor and detector interface is packaged wSensor and detector interfaceh materials from Tube.In order to save space, 28-SSOP (0.209, 5.30mm Width) packages are used.The characteristics of CCD Signal Processor, 14-Bit enable it to provide superior performance.The technique of Surface Mount is employed as its mounting type.If possible, the operating temperature should be kept at 0°C~70°C in order to avoid unnecessary cooling.As an input type, Logic is used.28 terminations are used to prevent signals from reflecting off the end of the transmission line.Its base part number of AD9822 can be used to locate related electronic parts.An array of 1 functions has been configured.This is a 28-pin type electronic device.28 component pins are designed for its specified functions.In Surface Mount, it is mounted.Sensor and detector interface is possible to improve efficiency by maintaining the operating supply current at 90mA.The supply voltage will be exceeded by 5.35V and failures will occur.When failure occurs, it is likely that the supply voltage will be below 4.75V.The 3 channels are designed for the transmission of data.Application voltages of 5V are required to operate it.

AD9822JRSZ Features

operate temperature at the range of 90mA

AD9822JRSZ Applications

There are a lot of Analog Devices Inc. AD9822JRSZ applications of sensor and detector interfaces.

• Automation of Doors
• Proximity sensor
• Motor Speed Control
• Zero Crossing Switch
• Level transmitter
• Crankshaft VRS Interfaces
• Photovoltaic systems
• Hearables
• Collision-Avoidance for Drones, Robots and
• Strain Gauges