ADA4930-1YCPZ-R2 Overview

Packaged in a 16-VFQFN Exposed Pad, CSP case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 16 mark. The pins on this board total to 16 in total. It is important to remember that this op amp should be operated at a voltage of 3.3V volts. Linear amplifier includes 16 pins. Op amp rates 150μV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~105°C . As long as the supply current of the chip does not exceed 34mA, this op amp ic can operate. There should be no change in the voltage gain at 64dB. This op amp contains 1 circuits. 1 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 3.3V. 3MOhm is the range in which the op amp resistance should lie. Interface IC type LINE DRIVER can be assigned to the op amps.

ADA4930-1YCPZ-R2 Features

16 Pins
supply voltage of 3.3V
64dB voltage gain
Resistance of 3MOhm

ADA4930-1YCPZ-R2 Applications

There are a lot of Analog Devices Inc. ADA4930-1YCPZ-R2 Instrumentational OP Amps applications.

• Video conversion and routing
• Addition operation circuits
• Fast A/D and D/A converters
• E-book readers
• Biopotential
• Inverse/same-phase proportional circuit
• MP3
• Portable electronic products powered by batteries
• Mobile phone
• Power transmission