In order to package it as a clock IC, the Tape & Reel (TR) package is used. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. This clock generator ic can sustain 260 degrees of temperature during reflowing. 16 terminations can be found in frequency synthesizer. A voltage of 3V should be applied to this electronic frequency generator. A clock generator's input is called CMOS, TTL and it is designed as the input for this clock generator. 400MHz is the maximal value for normal operation. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. A maximum voltage of 2.7V should be used for this frequency generator for safety reasons. There are 2.7V~3.3V different supply voltages that can be provided for this RF synthesizer. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. It's compatible with Clock logic levels. It has been classified as a Clock/Frequency Synthesizer (RF), Phase Detector electronic part, which means that it is a semiconductor. It is a 16-bit IC that is designed for microprocessors specifically. These related electrical parts are available for the base part number ADF4002. There are 16 pins on the frequency generator that are available for use. Clock PLL is capable of handling a voltage of 3V. The device is usually classified as a type of PLL or Frequency Synthesis Circuits device. Clock PLL is facilitated with 1 signal outputs to magnify output frequency as high as possible. For the clock time generator to function properly, 5mA of supply current must be provided. There should be a maximum supply current of 6mA for this time clock generator.
ADF4002BRUZ-RL Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Supply voltage of 3V Operating supply voltage of 3V
ADF4002BRUZ-RL Applications
There are a lot of Analog Devices Inc. ADF4002BRUZ-RL Clock Generators applications.