As a clock IC, it is packaged by the Tube method. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 16 terminations. Basically, this time clock generator needs a voltage of 3V. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. A maximum voltage of 2.7V should be used for this frequency generator for safety reasons. There should be 2.7V~5.5V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with Clock logic levels. As far as this electronic part is concerned, it can be classified as a Clock/Frequency Synthesizer (RF) component. Microprocessor-specific clock PLL with 16 bits. The related electronic parts of part number ADF4110 are listed below. There are 16 pins that are available on the clock PLL. RF synthesizers can handle a voltage of 5V as the supply voltage. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. 6-BIT SWALLOW COUNTER is included in this frequency generator to enhance clock signal output. The output frequency can be magnified as high as possible with the assistance of 1 signal outputs. High efficiency is achieved when operating at a frequency of 550MHz. For its full function, a supply current of 4.5mA is required. This RF synthesizer operation requires a maximum current of 5.5mA.
ADF4110BRUZ Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Supply voltage of 3V Operating supply voltage of 5V
ADF4110BRUZ Applications
There are a lot of Analog Devices Inc. ADF4110BRUZ Clock Generators applications.