Tube-method packaging is used for clock ICs. The 16-TSSOP (0.173, 4.40mm Width) package includes this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 16 terminations can be found in frequency generators. Basically, a voltage of 3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be CMOS, TTL. 1.4GHz is the maximal value for normal operation. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. This frequency synthesizer requires a supply voltage above 2.7V to be safe. As far as the supply voltage is concerned, clock PLL can be used with 2.7V~5.5V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. Clock logic levels are supported by this RF synthesizer. It has been classified as a Clock/Frequency Synthesizer (RF) electronic part, which means that it is a semiconductor. Microprocessor-specific clock PLL with 16 bits. ADF4111 is the base part number for finding related electronic parts. There are 16 pins on the frequency generator that are available for use. In terms of the supply voltage, analog clock generator can handle 5V volts. The device is usually classified as a type of PLL or Frequency Synthesis Circuits device. For better clock signal output, this clock PLL is featured with 6-BIT SWALLOW COUNTER. 1 signal outputs enable clock PLL to magnify output frequency as high as possible. High efficiency is achieved when operating at a frequency of 1.2GHz. A supply current of 4.5mA is required to fully operate clock PLL. This clock generator operation can supply up to 5.5mA of current.
ADF4111BRUZ Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Supply voltage of 3V Operating supply voltage of 5V
ADF4111BRUZ Applications
There are a lot of Analog Devices Inc. ADF4111BRUZ Clock Generators applications.