Clock ICs are packaged using the Tray method. In the 20-VFQFN Exposed Pad, CSP package, there is an embedded clock generator. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. There are a total of 20 terminations in this file. A voltage of 3V should be applied to this electronic frequency generator. In this case, CMOS, TTL is designed to be the input of the clock generator. The frequency generator has a maximum frequency of 4GHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.3V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 2.7V is recommended for safety reasons. There are 2.7V~3.3V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~125°C, which is -40°C~125°C. There are several logic levels in Clock logic that can be used with this clock generator. It is possible to classify this electronic component as a Fractional N Synthesizer (RF). An IC that generates clocks specifically for microprocessors, this clock PLL is 20-bits in si20e. The related electrical components for the base part number ADF4153 can be found below. A 20 pin is available on the PLL. Time clock generator is capable of handling a voltage of 5V. A PLL or Frequency Synthesis Circuits clock generator is essentially what this device is. The output frequency is magnified as high as possible with 1 signal outputs. Time clock generator requires a supply current of 20mA to fully function. During this clock generator operation, a maximum current of 100μA is supplied.
ADF4153YCPZ Features
Available in the 20-VFQFN Exposed Pad, CSP Supply voltage of 3V Operating supply voltage of 5V
ADF4153YCPZ Applications
There are a lot of Analog Devices Inc. ADF4153YCPZ Clock Generators applications.