Clock ICs are packaged using the Tape & Reel (TR) method. A Clock PLL is included with the 16-TSSOP (0.173, 4.40mm Width) package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains a total of 16 terminations within RF synthesizer. This time clock generator should be voltaged at 3V. CMOS, TTL is designed as this clock generator's input. Providing a maximum frequency of 6.2GHz, this clock-based RF synthesizer is suitable for a variety of applications. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximal supply voltage (Vsup) reaches 3.3V. The supply voltage for this frequency synthesizer should be kept above 2.7V for safety considerations. There are 2.7V~3.3V available for use with this clock PLL. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. There are several logic levels in Clock logic that can be used with this clock generator. As far as this electronic part is concerned, it can be classified as a Fractional N Synthesizer (RF) component. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. The related electronic parts of part number ADF4156 are listed below. There is an available 16 pin on the PLL. PLL clock can handle a voltage of 5V as its supply voltage. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. 1 signal outputs allow for maximi1ation of output frequency. A supply current of 26mA needs to be provided to fully play RF synthesizer's function. Time clock generator supply currents should not exceed 32mA.
ADF4156BRUZ-RL Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Supply voltage of 3V Operating supply voltage of 5V
ADF4156BRUZ-RL Applications
There are a lot of Analog Devices Inc. ADF4156BRUZ-RL Clock Generators applications.