The Tape & Reel (TR) method is used for packaging clock ICs. As part of the 20-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains a total of 20 terminations within RF synthesizer. This clock generator ic should receive a voltage of 3V. CMOS, TTL is designed for clock generator's input. A total of 1 circuits are implemented to access the full performance of the electrical part. This clock-based frequency generator provides a frequency up to 2.7GHz Max. Thanks to the Surface Mount, this electric component can easily be installed on a panel. This clock PLL works with a supply voltage of 2.7V~5.5V. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. In this case, we are dealing with a frequency synthesizer that can be used with Clock logic levels. This electronic component can be classified into Clock/Frequency Synthesizer (RF/IF). This clock-generating IC is a 20-bit device designed explicitly for microprocessors. Related electrical parts can be found for the base part number ADF4212. There is an available 20 pin on the PLL. Clock PLL is capable of handling a voltage of 5V. PLL or Frequency Synthesis Circuits-type frequency generators are usually classified as this type. Time clock generator requires a supply current of 11.5mA to fully function. I would like to briefly introduce you to a 2-element frequency synthesizer that performs well with low jitter. There should be a maximum supply current of 4mA for this time clock generator.
ADF4212BRUZ-RL7 Features
Available in the 20-TSSOP (0.173, 4.40mm Width) Supply voltage of 3V Operating supply voltage of 5V
ADF4212BRUZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4212BRUZ-RL7 Clock Generators applications.