Shipping overseas is convenient with the electronic component packed in 32-WFQFN Exposed Pad, CSP. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. 16:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~125°C TA. In total, there are 32 terminations. This electronic part offers high-quality output due to its 16 channels. With a 15V voltage supply, the electrical component should be turned on and run. A total of 32 pins are injected into the body of the electronic part. It consists of 1 circuits. Using the ADG1206 search parameter, you can discover variants of the switch. There is 200Ohm internal resistance in this digital multiplexer. For functions related to 32 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. It is recommended that the electrical component receives a voltage of 5V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. When using dual power supplies, you should attach at least 5V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. A voltage of 12V can be used to operate the electronic component. There are 16 inputs to be operated. It is possible to transfer data over a 280MHz-bandwidth. Drain to Source resistance is 200Ohm.