The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~125°C TA. In total, there are 16 terminations. The electronic part provides high-quality output because it has 8 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Circuits number 1 make up this analogue multiplexer. Using the ADG1208 search parameter, you can discover variants of the switch. This digital multiplexer has 120Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 16.5V voltage to the switch device. In order for the electronic part to function properly, the lowest voltage should be 5V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. You should attach at least 5V voltage if you are using dual power supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. 12V operating voltages can be used with this electrical part. Among the inputs that can be operated are the 8 inputs. The data can be transferred over a wide range of bandwidths, called 550MHz bandwidths.
ADG1208YRZ Features
8 Channels Bandwidth: 550MHz
ADG1208YRZ Applications
There are a lot of Analog Devices Inc. ADG1208YRZ Analog Switches & Multiplexers ICs applications.
High speed data transmission line cards
Digital cross connects (DSX-1)
Voice over IP/DSL – Integrated Access Devices, Smart
E1 Multiplexer
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads