ADG1209YRUZ Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. 16 terminations have been made so far. A 4 channel electronic part produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. Circuits based on SP4T switching are used to construct these analog switch ics. This multiplexer is composed of 2 circuits. Try searching for ADG1209 variants of the analog switch ic. As far as internal resistance is concerned, it has 200Ohm. Datasheets for functions of 16 pins are available. In this analog multiplexer, the value is Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. 5V is the lowest voltage the electrical component should receive. There is no problem with using dual supply voltage, but it should not exceed 16.5V. You should attach at least 5V voltage if you are using dual power supply. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. A voltage of 12V can be used to operate the electronic component. There are 8 inputs to be operated. There are 550MHz bandwidths for data transfer.

ADG1209YRUZ Features

4 Channels
Switch Circuit: SP4T
Bandwidth: 550MHz

ADG1209YRUZ Applications

There are a lot of Analog Devices Inc. ADG1209YRUZ Analog Switches & Multiplexers ICs applications.

• RGB switches
• Data Acquisition Systems
• Communication systems
• 65 V DACs
• Medical systems
• Residential Gateways, Home Gateway/Router
• Optical Applications
• High speed data transmission line cards
• ISDN NT1/TA
• Medical Instrumentation