ADG1409SRU-EP-RL7 Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Digi-Reel?. Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Around -55°C~125°C TA is the extended operating temperature. There are 16 terminations totally. A high-quality output is provided by the electrical component's 4 channels. A 5V voltage supply should turn on and run the electronic component. The electrical component body receives 16 pins. On the other hand, analog switches can be constructed using SP4T switching circuits. It consists of 2 circuits. Look for analog switch ic variants by searching with ADG1409. In this multiplexer, the internal resistance is 4.7Ohm. The datasheets for the 16 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. 5V is the lowest voltage that should be fed to the electronic electronic part. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. A dual power supply should have at least 4.5V voltage attached. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. Operating voltages range from 12V. Among the inputs that can be operated are the 8 inputs. The data can be transferred over a wide range of bandwidths, called 115MHz bandwidths.

ADG1409SRU-EP-RL7 Features

4 Channels
Switch Circuit: SP4T
Bandwidth: 115MHz

ADG1409SRU-EP-RL7 Applications

There are a lot of Analog Devices Inc. ADG1409SRU-EP-RL7 Analog Switches & Multiplexers ICs applications.

• High reliability control systems
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• E1 Multiplexer
• Public switching systems
• Video signal routing
• PBXs
• Optical Applications
• Intelligent PBX
• Remote wireless modules
• Channel Banks