ADG1604BRUZ-REEL7 Overview

Packed in 14-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 4:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~125°C TA are extended for operation. In total, there have been 14 terminations. A 4 channel electronic part produces high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. As part of the design of the 14 series, this electronic part has been incorporated into the system. These analog multiplexers are built based on SP4T switching circuits. There are 1 circuits in this switch device. Try searching for ADG1604 variants of the analog switch ic. As far as internal resistance is concerned, it has 1.1Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16V. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 3.3V. An operating current of 230μA would be sufficient for this switch device. Despite this switch device's dual supply capability, its voltage should not exceed 8V. It is recommended that you attach at least 3.3V to your dual power supply. The electronic component can function from 5V. This switch operates within the bandwidth of 19MHz.

ADG1604BRUZ-REEL7 Features

4 Channels
Switch Circuit: SP4T
230μA Supply Current
Bandwidth: 19MHz

ADG1604BRUZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG1604BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

• High-Voltage
• Isolation
• Cellular phones
• Audio and video switching
• Sample hold systems
• Routers
• Data Acquisition Systems
• PCMCIA cards
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Digital Cross-Connects