ADG1608BRUZ-REEL7 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. A total of 1 circuits make up this switch device. Search with ADG1608 if you are looking for analog multiplexer variants. It has an internal resistance of 4.5Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 16V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 3.3V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 300μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. In the case of dual power supplies, you should connect at least 3.3V. There is a voltage range of 5V operating voltages for the electrical part. The transfer of data can be performed over 40MHz bandwidths.

ADG1608BRUZ-REEL7 Features

8 Channels
300μA Supply Current
Bandwidth: 40MHz

ADG1608BRUZ-REEL7 Applications

There are a lot of Analog Devices Inc.
ADG1608BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems