ADG1612BRUZ-REEL7 Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 16. A total of 16 pins are injected into the body of the electronic part. A SPST - NO switching circuit is used for these analog switches. Search with ADG1612 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 1.1Ohm. To find out what the 16 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 16V. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended that the electrical component receives a voltage of 3.3V. In order to operate this switch device, it would need a current of 320μA. It may damage the digital multiplexer if the voltage is higher than 480μA. Despite this switch's dual supply capability, its voltage should not exceed 8V. It is recommended that you attach at least 3.3V to your dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. Operating the 4 inputs requires 4 inputs. In 38MHz-bandwidths, data can be transferred.

ADG1612BRUZ-REEL7 Features

Switch Circuit: SPST - NO
320μA Supply Current
Bandwidth: 38MHz

ADG1612BRUZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG1612BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

• FTTH
• Medical
• Relay Replacement
• Battery Powered Systems
• CSU
• Communication systems
• Audio and video signal routing
• DSLAMs
• Transmit
• E1 Multiplexer