ADG1636BRUZ-REEL7 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. 16 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 16 pins. Based on SPDT switching circuits, these analog multiplexers work. Try searching with ADG1636 if you're looking for variants. The internal resistance of this digital multiplexer is 1.1Ohm. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 16V volts for the multiplexer. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 3.3V should be applied to the electronic component. This multiplexer would work with 230μA current. A voltage higher than 360μA may cause damage to the switch multiplexer. For this multiplexer, dual supply voltage is feasible, but it should not exceed 8V. With dual power supplies, you should attach at least 3.3V. There is an integrated analog IC SPST in the module. There are 2 inputs to be operated. There are 27MHz bandwidths for data transfer. A analog switch ics with 4 outputs is included.

ADG1636BRUZ-REEL7 Features

1 Channels
Switch Circuit: SPDT
230μA Supply Current
Bandwidth: 27MHz

ADG1636BRUZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG1636BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Medical Instrumentation
• FTTH
• Signal routing between systems
• Ultrasound
• Wireless Local Loop
• Data switching
• Precision test equipment
• Fiber to the Home
• Public switching systems
• Communication systems