CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE
Max Power Dissipation
240mW
Technology
CMOS
Terminal Position
QUAD
Terminal Form
J BEND
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
15V
Terminal Pitch
1.27mm
Time@Peak Reflow Temperature-Max (s)
40
Base Part Number
ADG201
Pin Count
20
Qualification Status
Not Qualified
Polarity
Non-Inverting
Number of Channels
4
Interface
Parallel
Max Supply Voltage
16.5V
Min Supply Voltage
10.8V
Power Dissipation
240mW
Max Supply Current
10mA
Throw Configuration
SPST
Turn On Delay Time
50 ns
Voltage - Supply, Single/Dual (±)
10.8V~16.5V ±13.5V~16.5V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
50 ns
Max Dual Supply Voltage
16.5V
On-State Resistance (Max)
50Ohm
Min Dual Supply Voltage
10.8V
High Level Output Current
20mA
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
72 dB
Current - Leakage (IS(off)) (Max)
1nA
Channel Capacitance (CS(off), CD(off))
10pF 10pF
On-state Resistance Match-Nom
3Ohm
Switch Circuit
SPST - NC
Switch Time (Ton, Toff) (Max)
50ns, 50ns
Charge Injection
10pC
Channel-to-Channel Matching (ΔRon)
1.5 Ω
Crosstalk
-86dB @ 100kHz
Drain to Source Resistance
50Ohm
Height
4.454mm
Length
9.04mm
Width
8.38mm
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Contains Lead
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$74.855830
$74.85583
10
$70.618707
$706.18707
100
$66.621422
$6662.1422
500
$62.850399
$31425.1995
1000
$59.292829
$59292.829
ADG201HSKPZ Product Details
ADG201HSKPZ Overview
Shipping overseas is convenient due to the electrical component's packing in 20-LCC (J-Lead). Advanced packaging method Tube is used to provide high reliability. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. The total number of terminations is 20. Due to its 4 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 20 pins are injected into the electrical part body. The analog switch ics are built using SPST - NC switching circuits. Using the ADG201 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 50Ohm. You can find the functions of the 20 pins in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. A cost-effective Dual, Single supply type analogue multiplexer. 10.8V is the lowest voltage that should be fed to the electronic electronic part. The switch multiplexer may be damaged if it is exposed to voltage greater than 10mA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. For dual power supplies, a voltage of at least 10.8V should be attached. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE. It has a Drain to Source resistance of 50Ohm ohms.
ADG201HSKPZ Features
4 Channels Switch Circuit: SPST - NC Additional Features: CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE Drain-to-Source resistance: 50Ohm
ADG201HSKPZ Applications
There are a lot of Analog Devices Inc. ADG201HSKPZ Analog Switches & Multiplexers ICs applications.