ADG212AKPZ Overview

This electronic part is conveniently packaged in 20-LCC (J-Lead), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature around -40°C~85°C TA extended. In total, there are 20 terminations. Due to its 4 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. It is part of the design of the 20 series that this electronic component is included. Circuits based on SPST - NO switching are used to construct these analog switch ics. Look for analog switch ic variants by searching with ADG212. The internal resistance of this digital multiplexer is 115Ohm. To find out what the 20 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 25V voltage to the switch device. The analog switch ic is of the Dual supply type and is cost-effective. A digital multiplexer may suffer damage if voltage is applied above 1mA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating voltages range from 5V. This electronic component presents a Drain to Source resistance of 175Ohm.

ADG212AKPZ Features

4 Channels
Switch Circuit: SPST - NO
Drain-to-Source resistance: 175Ohm

ADG212AKPZ Applications

There are a lot of Analog Devices Inc. ADG212AKPZ Analog Switches & Multiplexers ICs applications.

• Routers
• Channelized and Unchannelized DS3 applications
• Isolation
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Avionics and Military Systems
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Central office
• Data Acquisition Systems
• Transmit
• Intelligent PBX