ADG3242BRJ-R2 Overview

Due to the fact that it is provided in the SOT-23-8, digital switch allows the board to be compacted.The package is packaged in accordance with Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.For the analog part of the multiplexers, an IC Bus Switch is used.Designers have greater flexibility when digital controlled switch operates at a 2.5V 3.3V supply voltage.Among its basic features are 8 terminations.There is a base part number of ADG3242 which can also be used in order to locate the logic switch that are related to this item.The turn signal switch is supplied with a voltage of 2.5V volts.Signal switch has 8 component pins.It is the end of conductors that is represented by GULL WING.This supply type employs Single.It is configured with 8 pins.The mounting point is Surface Mount.Signal multiplexer provides 2 bits.Avoid unnecessary failures by keeping Vsup at 3.6V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without external influences, it consumes 200μA current of multiplexer ic.As far as the resistance is concerned, it operates with 2.It operates with a resistance of 12Ohm.85°C is an acceptable maximum temperature for this signal switch.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.

ADG3242BRJ-R2 Features

Supplied in the SOT-23-8 package
Adopting a supply type of Single

ADG3242BRJ-R2 Applications

There are a lot of Analog Devices Inc. ADG3242BRJ-R2 Signal Switches / Multiplexers / Decoders applications.

• Time division multiplexing system
• Communication system
• Idle motor
• Enabling block of memory depending on address in memory chips
• A/D converters
• Analog to digital conversion
• Paper plants
• Textile mills
• Medical industry
• Recording transmission