ADG333ABRZ-REEL Overview

The electronic part can be shipped overseas conveniently because it is packaged in 20-SOIC (0.295, 7.50mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. Increasing operating temperature to around -40°C~85°C TA. A total of 20 terminations have been recorded. A electrical component with 4 channels is capable of high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 20 series. A SPDT switching circuit is used for these analog switches. Try searching with ADG333 if you're looking for variants. There is 45Ohm internal resistance in this digital multiplexer. To find out what the functions of 20 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. The digital multiplexer has a low cost Dual, Single supply. A low voltage of 3V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 50nA current. Putting voltage greater than 250μA on the multiplexer may cause damage. Despite this switch's dual supply capability, its voltage should not exceed 20V. In the case of dual power supplies, you should connect at least 3V. 12V operating voltages can be used with this electrical part. 8 outputs are included in the analogue multiplexer.

ADG333ABRZ-REEL Features

4 Channels
Switch Circuit: SPDT
50nA Supply Current

ADG333ABRZ-REEL Applications

There are a lot of Analog Devices Inc. ADG333ABRZ-REEL Analog Switches & Multiplexers ICs applications.

• Low-Voltage
• DSUs
• T1/E1 Terminals
• PCMCIA cards
• Signal routing between systems
• Microprocessor Controlled Analog Systems
• ATM
• Audio and video switching
• High-Voltage
• Automotive applications