ADG411BRUZ-REEL7 Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. In total, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. An 15V voltage supply should allow the electrical part to be turned on and run. There are 16 pins injected into the electronic part body. SPST - NC switching circuits are used in these analog switch ics. Using the ADG411 search parameter, you can discover variants of the switch. Analog switches have 35Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 25V. The analog switch ic is of the Dual, Single supply type and is cost-effective. A low voltage of 5V should be applied to the electronic component. In order to operate this switch device, it would need a current of 100pA. A digital multiplexer may suffer damage if voltage is applied above 1μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. It is recommended that you attach at least 13.5V to your dual power supply. 12V operating voltages are supported by the electronic component. There is also ALSO OPERATE WITH 12V SINGLE SUPPLY to look out for in this electronic part.

ADG411BRUZ-REEL7 Features

4 Channels
Switch Circuit: SPST - NC
100pA Supply Current
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY

ADG411BRUZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG411BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Mechanical reed relay replacement
• DSLAMs
• Sample-and-hold systems
• ATM
• Battery Powered Instruments
• RGB switches
• Communication systems
• Multiplexers
• Remote wireless modules
• Switching Systems