ADG412BN Overview

Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operational temperature extended around -40°C~85°C TA. Totally, there are 16 terminations. Due to its 4 channels, the electrical component produces high-quality output. A 15V voltage supply should turn on and run the electronic component. There are 16 pins injected into the electronic part body. Based on SPST - NO switching circuits, these analog multiplexers work. Using the ADG412 search parameter, you can discover variants of the switch. Analog switches have 35Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 25V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 5V. The analogue multiplexer may be damaged if voltage is greater than 1μA. Despite this switch's dual supply capability, its voltage should not exceed 22V. It is recommended that you attach at least 13.5V to your dual power supply. 12V operating voltages are supported by the electronic component. There is 25mOhm resistance between Drain and Source for this electronic part.

ADG412BN Features

4 Channels
Switch Circuit: SPST - NO
Drain-to-Source resistance: 25mOhm

ADG412BN Applications

There are a lot of Analog Devices Inc. ADG412BN Analog Switches & Multiplexers ICs applications.

• Cellular phones
• Fiber In The Loop (FITL)
• Cable Modem
• Communication systems
• Multi-Line E1 Interface Cards
• Avionics
• Relay replacements
• Video signal routing
• Switching Systems
• Public switching systems