ADG412BR-REEL Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. In total, there are 16 terminations. High-quality output is provided by the electronic component's 4 channels. An 15V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 16 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching with ADG412 if you're looking for variants. Analog switches have 35Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 25V to a switch device. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 5V. For this digital switch to work, 100pA current would suffice. The analogue multiplexer may be damaged if voltage is greater than 1μA. There is no problem with using dual supply voltage, but it should not exceed 22V. For dual power supplies, a voltage of at least 13.5V should be attached. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. The electrical part can be operated at 12V voltage levels. Don't forget the additional features of this electronic part, such as: ALSO OPERATE WITH 12V SINGLE SUPPLY.

ADG412BR-REEL Features

4 Channels
Switch Circuit: SPST - NO
100pA Supply Current
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY

ADG412BR-REEL Applications

There are a lot of Analog Devices Inc. ADG412BR-REEL Analog Switches & Multiplexers ICs applications.

• Channel Banks
• MP3 players
• Battery-powered systems
• Data Acquisition Systems
• Ultrasound
• Cell phones
• Precision test equipment
• SONET/SDH ADM
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Fiber In The Loop (FITL)