ADG426BRSZ Overview

The electronic component is convenient to ship overseas because it is packed in a 28-SSOP (0.209, 5.30mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 16:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 28. By its 16 channels, the electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 28 pins. A total of 1 circuits make up this switch device. Try searching with ADG426 if you're looking for variants. This digital multiplexer has 80Ohm internal resistance. The functions of 28 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 25V. An operating current of 200μA would be sufficient for this switch device. It may damage the digital multiplexer if the voltage is higher than 200μA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. It can operate from 12V operating voltages. There are 16 inputs to be operated. Resistivity from Drain to Source is 80Ohm for this electronic part.

ADG426BRSZ Features

16 Channels
200μA Supply Current
Drain-to-Source resistance: 80Ohm

ADG426BRSZ Applications

There are a lot of Analog Devices Inc. ADG426BRSZ Analog Switches & Multiplexers ICs applications.

• Cable PC
• Ultrasound
• Voice over IP/DSL – Integrated Access Devices, Smart
• PBXs
• Avionics
• Relay Replacement
• SDH/SONET multiplexers
• Access Concentrators
• Isolation
• Data switching