Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 16. The electronic part delivers high-quality output through its 4 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. The analog switch ics are built using SPST - NC switching circuits. Using the ADG431 search parameter, you can discover variants of the switch. There is 24Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 25V volts for the multiplexer. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 5V. For this digital switch to work, 100pA current would suffice. A digital multiplexer may suffer damage if voltage is applied above 100nA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. The voltage should be at least 13.5V if you are using dual power supplies. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. A voltage of 12V can be used to operate the electronic component. This electronic part has additional features, such as: CAN ALSO OPERATE WITH 12V SUPPLY.
ADG431BRZ-REEL Features
4 Channels Switch Circuit: SPST - NC 100pA Supply Current Additional Features: CAN ALSO OPERATE WITH 12V SUPPLY
ADG431BRZ-REEL Applications
There are a lot of Analog Devices Inc. ADG431BRZ-REEL Analog Switches & Multiplexers ICs applications.