ADG441BRZ Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. As a result of its 4 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. There is an electrical component included in the 16 series. Multiplexers built on a SPST - NC switching circuit are built. Try searching with ADG441 if you're looking for variants. A 70Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. Analog switch ics with Dual, Single supply type are cost-effective. 10.8V is the lowest voltage that should be fed to the electronic electronic part. Put voltage above 80μA on the multiplexer to cause damage. There is no problem with using dual supply voltage, but it should not exceed 22V. The voltage should be at least 13.5V if you are using dual power supplies. There is a voltage range of 12V operating voltages for the electrical part. There is 40Ohm Drain to Source resistance on this electronic part.

ADG441BRZ Features

4 Channels
Switch Circuit: SPST - NC
Drain-to-Source resistance: 40Ohm

ADG441BRZ Applications

There are a lot of Analog Devices Inc. ADG441BRZ Analog Switches & Multiplexers ICs applications.

• DSUs
• Precision data acquisition
• Data Acquisition Systems
• FTTH
• T1/E1 Terminals
• Automotive applications
• Data switching
• Audio and video routing
• Relay Replacement
• Medical