Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG4613BCPZ-REEL7

  • ADG4613BCPZ-REEL7
  • ADG4613BCPZ-REEL7

ADG4613BCPZ-REEL7

ADG4613BCPZ-REEL7

Analog Devices Inc.

73ns, 91ns SPST - NO/NC 5.1Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG4613 16 Pins 10nA 5V 16-WFQFN Exposed Pad, CSP

SOT-23

ADG4613BCPZ-REEL7 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 1 month ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 16-WFQFN Exposed Pad, CSP
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~105°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Resistance 6.1Ohm
Subcategory Multiplexer or Switches
Max Power Dissipation 7.2mW
Technology CMOS
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 0.5mm
[email protected] Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number ADG4613
Output SEPARATE OUTPUT
Pin Count 16
Qualification Status Not Qualified
Polarity Non-Inverting
Number of Channels 1
Interface Parallel
Max Supply Voltage 12V
Min Supply Voltage 3V
Test Frequency 1MHz
Power Dissipation 7.2mW
Max Supply Current 140μA
Turn On Delay Time 125 ns
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 3V~12V ±3V~5.5V
Supply Type Dual, Single
Bandwidth 250MHz
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 125 ns
Max Dual Supply Voltage 5.5V
On-State Resistance (Max) 5.1Ohm
Min Dual Supply Voltage 3V
Dual Supply Voltage 5V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 54 dB
Current - Leakage (IS(off)) (Max) 10nA
Channel Capacitance (CS(off), CD(off)) 11.5pF 11.5pF
On-state Resistance Match-Nom 0.05Ohm
Switch Circuit SPST - NO/NC
Switch Time (Ton, Toff) (Max) 73ns, 91ns
Insertion Loss (dB) -0.27 dB
Charge Injection 292pC
Channel-to-Channel Matching (ΔRon) 50m Ω
Crosstalk -74dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Drain to Source Resistance 6.1Ohm
Signal Current-Max 0.35A
Height Seated (Max) 0.8mm
Length 3mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $46.849355 $46.849355
10 $44.197504 $441.97504
100 $41.695759 $4169.5759
500 $39.335622 $19667.811
1000 $37.109077 $37109.077
ADG4613BCPZ-REEL7 Product Details

ADG4613BCPZ-REEL7 Overview


Packed in 16-WFQFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~105°C TA. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A SPST - NO/NC switching circuit is used for these analog switches. Look for analog switch ic variants by searching with ADG4613. The internal resistance of this digital multiplexer is 6.1Ohm. Please refer to the datasheets for 16 pins functions. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. Analog switch ics with Dual, Single supply type are cost-effective. There should be 3V voltage fed to the electrical part below 3V. The switch multiplexer may be damaged if it is exposed to voltage greater than 140μA. For this switch, a dual supply voltage is feasible, but it must not exceed 5.5VYou should attach at least 3V voltage if you are using dual power supply. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The 4 inputs need to be operated in order to work. There are 250MHz bandwidths for data transfer. It has a Drain to Source resistance of 6.1Ohm ohms.

ADG4613BCPZ-REEL7 Features


1 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 250MHz
Drain-to-Source resistance: 6.1Ohm

ADG4613BCPZ-REEL7 Applications


There are a lot of Analog Devices Inc. ADG4613BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.

  • 65 V DACs
  • Avionics and Military Systems
  • Ultrasound
  • Residential Gateways, Home Gateway/Router
  • SDH/SONET multiplexers
  • Switching Systems
  • Fiber In The Loop (FITL)
  • Microprocessor controlled systems
  • Mechanical reed relay replacement
  • Access Concentrators

Related Part Number

MC14051BDTR2G
ON Semiconductor
MC14051BDTR2G
$0 $/piece
ADG1308BRZ-REEL7
Analog Devices Inc.
ADG1308BRZ-REEL7
$0 $/piece
MAX4583CEE+T
Maxim Integrated
MAX4583CEE+T
$0 $/piece
MAX4712EUE
Rochester Electronics, LLC
MAX4712EUE
$0 $/piece
MAX4680CAE+
Maxim Integrated
MAX4680CAE+
$0 $/piece
DG403DVZ
Renesas Electronics America Inc.
DG403DVZ
$0 $/piece
TMUX1101DCKR
Texas Instruments
TMUX1101DCKR
$0 $/piece
MAX312CSE+T
Maxim Integrated
MAX312CSE+T
$0 $/piece
DG407DY
Rochester Electronics, LLC
DG407DY
$0 $/piece
DG2519EDN-T1-GE4
Vishay Siliconix
DG2519EDN-T1-GE4
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News