ADG506ABQ Overview

Packed in 28-CDIP (0.600, 15.24mm), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have a number of circuits 16:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. The total number of terminations is 28. High-quality output is provided by the electronic component's 16 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. Into the electrical component body are injected 28 pins. Circuits number 1 make up this analogue multiplexer. Using the ADG506 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 300Ohm. To find out what the 28 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. It is recommended to use 10.8V as the lowest voltage for the electrical part. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. With dual power supplies, you should attach at least 10.8V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs.

ADG506ABQ Features

16 Channels

ADG506ABQ Applications

There are a lot of Analog Devices Inc. ADG506ABQ Analog Switches & Multiplexers ICs applications.

• Central office
• Fiber to the Home
• Remote Powered Equipment
• Voice over IP/DSL – Integrated Access Devices, Smart
• Mechanical reed relay replacement
• Fault Tolerant Systems
• Transmit
• 65 V DACs
• PBX interfaces
• Digital Cross-Connects