ADG506AKRZ Overview

The electrical component comes in 28-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 28 terminations have occurred. A electrical component with 16 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. Into the electrical component body are injected 28 pins. Circuits number 1 make up this analogue multiplexer. Look for analog switch ic variants by searching with ADG506. A 700Ohm internal resistance characterizes this multiplexer. The datasheets for the 28 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. It is recommended to use 10.8V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 600μA current. A voltage higher than 1.5mA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VFor dual power supplies, a voltage of at least 10.8V should be attached. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Among the inputs that can be operated are the 16 inputs.

ADG506AKRZ Features

16 Channels
600μA Supply Current

ADG506AKRZ Applications

There are a lot of Analog Devices Inc.
ADG506AKRZ Analog Switches & Multiplexers ICs applications.

• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)