ADG506ATE/883B Overview

This electronic part is conveniently packaged in 28-LCC, making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. In Surface Mount, you'll find this switch device. 16:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -55°C~125°C. A total of 28 terminations have been recorded. The electronic part delivers high-quality output through its 16 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electronic part body is injected with 28 pins. Circuits number 1 make up this analogue multiplexer. Try searching with ADG506 to find analog multiplexer variants. There is 700Ohm internal resistance in this digital multiplexer. For details about the functions of 28 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. 10.8V should be the lowest voltage fed to the electronic component. This multiplexer would work with 1.5mA current. Using a single voltage supply, this switch device consumes 10.8V~16.5V volts. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. For dual power supplies, a voltage of at least 10.8V should be attached. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. Operating voltages of 15V are compatible with the electrical part. Operating 16 inputs is required.

ADG506ATE/883B Features

16 Channels
1.5mA Supply Current

ADG506ATE/883B Applications

There are a lot of Analog Devices Inc. ADG506ATE/883B Analog Switches & Multiplexers ICs applications.

• Digital Cross-Connects
• Central office
• Precision test equipment
• Cell phones
• Battery-powered systems
• Relay Replacement
• USB 1.1 signal switching circuits
• Low-Voltage
• Intelligent PBX
• SDH