ADG507AKR-REEL7 Overview

As the electronic part is packed in 28-SOIC (0.295, 7.50mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Extended operating temperature around -40°C~85°C TA. The electronic part delivers high-quality output through its 1 channels. A total of 28 pins are injected into the electrical part body. It consists of 2 circuits. Try searching for ADG507 variants of the analog switch ic. In this multiplexer, the internal resistance is 300Ohm. For details about the functions of 28 pins, please refer to the datasheets. Multiplexers should not be powered above 16.5V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 10.8V. This multiplexer would work with 600nA current. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VFor dual power supplies, a voltage of at least 10.8V should be attached. It can operate from 15V operating voltages. It is possible to operate 16 inputs.

ADG507AKR-REEL7 Features

1 Channels
600nA Supply Current

ADG507AKR-REEL7 Applications

There are a lot of Analog Devices Inc. ADG507AKR-REEL7 Analog Switches & Multiplexers ICs applications.

• Communication systems
• Central office
• Switching Systems
• Medical
• Digital Cross-Connects
• DSLAMs
• E1 Network Equipment
• Microprocessor controlled systems
• Ultrasound
• SDH