ADG507AKRUZ Overview

Shipping overseas is convenient with the electronic component packed in 28-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 28. A high-quality output is provided by the electrical component's 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. As part of its design, the 28 series is equipped with this electronic component. There are 2 circuits in this multiplexer. Try searching for ADG507 variants of the analog switch ic. An switch multiplexer with 300Ohm internal resistance has a value of 300Ohm. To find out what the functions of 28 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. There should be 10.8V voltage fed to the electrical part below 10.8V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. If you are using a dual power supply, you should attach at least 10.8V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. Among the inputs that can be operated are the 16 inputs. It has a Drain to Source resistance of 450Ohm ohms.

ADG507AKRUZ Features

1 Channels
Drain-to-Source resistance: 450Ohm

ADG507AKRUZ Applications

There are a lot of Analog Devices Inc. ADG507AKRUZ Analog Switches & Multiplexers ICs applications.

• High speed data transmission line cards
• Communications systems
• PDAs
• Cable Modem
• E1 Multiplexer
• Communication systems
• T1/E1 Terminals
• Remote Powered Equipment
• Cellular phones
• SONET