ADG511BRZ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~85°C TA. Totally, there are 16 terminations. A 4 channel electronic part produces high-quality output. A 5V voltage supply should turn on and run the electronic component. The electrical component body receives 16 pins. Unlike digital switches, these  are based on SPST - NC switching circuits. Using the ADG511 search parameter, you can discover variants of the switch. An switch multiplexer with 30Ohm internal resistance has a value of 30Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 4.5V. This multiplexer would work with 100pA current. The analogue multiplexer may be damaged if voltage is greater than 1μA. If put voltage greater than 5.5V on the multiplexer, damage may be caused to the device. When using dual power supplies, you should attach at least 4.5V. The electrical part can be operated at 5V voltage levels.

ADG511BRZ Features

• 4 Channels

• Switch Circuit: SPST - NC

• 100pA Supply Current

ADG511BRZ Applications

There are a lot of Analog Devices Inc. ADG511BRZ Analog Switches & Multiplexers ICs applications.

• High reliability control systems

• SONET/SDH ADM

• Frame Relay Equipment

• Modems

• Optical Applications

• Voice over IP/DSL – Integrated Access Devices, Smart

• Precision data acquisition

• ATM

• Avionics and Military Systems

• Video signal routing