ADG5204BRUZ-RL7 Overview

Shipping overseas is convenient with the electronic component packed in 14-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 14. A electrical component with 4 channels is capable of high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 14 pins. Unlike digital switches, these are based on SP4T switching circuits. 1 circuits are used in this analogue multiplexer. Try searching with ADG5204 to find analog multiplexer variants. A 160Ohm internal resistance characterizes this multiplexer. The functions of 14 pins can be found in the datasheets. Users shouldn't supply more than 36V voltage to the switch device. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 22V. It would be sufficient to run this analogue multiplexer with 85μA current. Put voltage above 70μA on the multiplexer to cause damage. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. When using dual power supplies, you should attach at least 9V. There are various bandwidths available for data transfer. This electrical component also includes additional features such as VIDEO APPLICATION.

ADG5204BRUZ-RL7 Features

4 Channels
Switch Circuit: SP4T
85μA Supply Current
-3db Bandwidth: 150MHz
Bandwidth: 136MHz
Additional Features: VIDEO APPLICATION

ADG5204BRUZ-RL7 Applications

There are a lot of Analog Devices Inc. ADG5204BRUZ-RL7 Analog Switches & Multiplexers ICs applications.

• DSLAMs
• Modems
• Intelligent PBX
• Automotive applications
• Automatic test equipment
• DSUs
• Isolation
• E1 Network Equipment
• Relay Replacement
• Industrial control systems