ADG526AKNZ Overview

The electronic component is convenient to ship overseas because it is packed in a 28-DIP (0.600, 15.24mm). High reliability is provided by advanced packaging method Tube. It is mounted in the position Through Hole. Multiplexer and demultiplexer circuits have a number 16:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. 28 terminations have been made so far. Due to its 16 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. There are 28 pins injected into the electronic part body. 1 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with ADG526 if you are looking for variants. Analog switches have 700Ohm internal resistance. To find out what the 28 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. It is recommended to use 10.8V as the lowest voltage for the electrical part. An operating current of 600μA would be sufficient for this switch device. It may damage the digital multiplexer if the voltage is higher than 1.5mA. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. It is recommended that you attach at least 10.8V to your dual power supply. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. There are 16 inputs to be operated. There is 280Ohm Drain to Source resistance on this electronic part.

ADG526AKNZ Features

16 Channels
600μA Supply Current
Drain-to-Source resistance: 280Ohm

ADG526AKNZ Applications

There are a lot of Analog Devices Inc. ADG526AKNZ Analog Switches & Multiplexers ICs applications.

• Modems
• Precision instrumentation
• Fiber to the Home
• Automatic test equipment
• Avionics and Military Systems
• FTTH
• Intelligent PBX
• ATM
• Frame Relay Equipment
• Ultrasound