ADG526AKPZ-REEL Overview

Presented in 28-LCC (J-Lead), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 16:1. The operating temperature is extended to around -40°C~85°C TA. There are 28 terminations totally. This electronic part offers high-quality output due to its 16 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. As part of the design of the 28 series, this electronic part has been incorporated into the system. There are 1 circuits in this multiplexer. ADG526 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 450Ohm. For details about the functions of 28 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 16.5V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended to use 10.8V as the lowest voltage for the electrical part. The switch device would be able to operate with 600μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. If you are using a dual power supply, you should attach at least 10.8V. A voltage of 15V can be used to operate the electronic component. It is possible to operate 16 inputs.

ADG526AKPZ-REEL Features

16 Channels
600μA Supply Current

ADG526AKPZ-REEL Applications

There are a lot of Analog Devices Inc. ADG526AKPZ-REEL Analog Switches & Multiplexers ICs applications.

• USB 1.1 signal switching circuits
• Relay replacements
• Sample-and-hold systems
• PCMCIA cards
• Remote wireless modules
• SONET
• RGB switches
• Digital cross connects (DSX-1)
• Communication systems
• Imaging