ADG526AKR Overview

The electrical component comes in 28-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 16:1. Extended operating temperature around -40°C~85°C TA. A total of 28 terminations have been recorded. High-quality output is provided by the electronic component's 16 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. Into the electrical component body are injected 28 pins. There are 1 circuits in this switch device. Using the ADG526 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 450Ohm. For details about the functions of 28 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. Dual, Single supply type digital switch with a low cost. A low voltage of 10.8V should be applied to the electronic component. This multiplexer would work with 600μA current. A voltage higher than 1.5mA may cause damage to the switch multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. When using dual power supplies, you should attach at least 10.8V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. Among the inputs that can be operated are the 16 inputs.

ADG526AKR Features

16 Channels
600μA Supply Current

ADG526AKR Applications

There are a lot of Analog Devices Inc. ADG526AKR Analog Switches & Multiplexers ICs applications.

• E1 Network Equipment
• Digital access cross connects
• PBX interfaces
• HDTV
• USB 1.1 signal switching circuits
• Sample hold systems
• Audio/video switches
• Ultrasound
• Battery Powered Systems
• Signal routing between systems