ADG526AKR-REEL Overview

Due to its 28-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 16:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Totally, there are 28 terminations. A 16 channel electronic part produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. A key feature of the 28 series is the inclusion of this electronic part as part of its design. Circuits number 1 make up this analogue multiplexer. Search with ADG526 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 450Ohm. Please refer to the datasheets for 28 pins functions. A voltage higher than 16.5V should not normally be supplied to the switches. An effective Dual, Single supply digital multiplexer. 10.8V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 600μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. You should attach at least 10.8V voltage if you are using dual power supply. A voltage of 15V can be used to operate the electronic component. There are 16 inputs to be operated.

ADG526AKR-REEL Features

16 Channels
600μA Supply Current

ADG526AKR-REEL Applications

There are a lot of Analog Devices Inc. ADG526AKR-REEL Analog Switches & Multiplexers ICs applications.

• Transmit
• Fiber to the Home
• Switching Systems
• Video signal routing
• Isolation
• Communication systems
• Medical systems
• Cell phones
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• DSLAMs