ADG529AKRW-REEL7 Overview

Shipping overseas is convenient with the electronic component packed in 18-SOIC (0.295, 7.50mm Width). High reliability is provided by advanced packaging method Cut Tape (CT). In Surface Mount, this analog switch is mounted. Total terminations are 18. High-quality output is provided by the electronic component's 4 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electronic part body is injected with 18 pins. There are 2 circuits in this multiplexer. Try searching with ADG529A if you're looking for variants. There is 450Ohm internal resistance in this digital multiplexer. For functions related to 18 pins, please refer to the datasheets. A voltage higher than 16.5V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 10.8V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 600μA current would be sufficient. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 10.8V. 15V operating voltages are supported by the electronic component. It is possible to operate 8 inputs. Temperatures above 85°C should not be used to operate the switches.

ADG529AKRW-REEL7 Features

4 Channels
600μA Supply Current

ADG529AKRW-REEL7 Applications

There are a lot of Analog Devices Inc.
ADG529AKRW-REEL7 Analog Switches & Multiplexers ICs applications.

• Transmit
• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems