ADG5409TCPZ-EP-RL7 Overview

This electronic part is conveniently packaged in 16-WQFN Exposed Pad, CSP, making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 4:1. Extended operating temperature around -40°C~125°C TA. In total, there are 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. There is an electrical component included in the 16 series. A SP4T switching circuit is used to build these analog multiplexers. Circuits number 2 make up this analogue multiplexer. Try searching for the analog switch ic with ADG5409 if you are looking for variants. A 14Ohm internal resistance characterizes this multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. normally, users should not supply switches with voltages higher than 40V. There should be 9V voltage fed to the electrical part below 9V. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 9V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. There are 88MHz bandwidths for data transfer.

ADG5409TCPZ-EP-RL7 Features

4 Channels
Switch Circuit: SP4T
Bandwidth: 88MHz

ADG5409TCPZ-EP-RL7 Applications

There are a lot of Analog Devices Inc. ADG5409TCPZ-EP-RL7 Analog Switches & Multiplexers ICs applications.

• PBXs
• Medical
• Fault Tolerant Systems
• Optical Applications
• Communication systems
• ISDN NT1/TA
• Wireless Local Loop
• High speed data transmission line cards
• Ultrasound
• Avionics