This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~125°C TA. 16 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. An injection of 16 pins is performed into the body of the electrical component. Multiplexers built on a SPST - NO/NC switching circuit are built. Try searching for ADG5413 variants of the analog switch ic. There is 10Ohm internal resistance in this digital multiplexer. The datasheets for the 16 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 40V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 9V should be applied to the electronic component. A digital multiplexer may suffer damage if voltage is applied above 55μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. It is recommended that you attach at least 9V to your dual power supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There are 4 inputs to be operated. A 160MHz-bandwidth can be used for data transfer. This electrical component also includes additional features such as 2 SWITCHES WITH INVERTED LOGIC.