ADG608BRUZ-REEL7 Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 8:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~85°C TA. In total, there have been 16 terminations. A electrical component with 8 channels is capable of high-quality output. A 5V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 16 pins. Circuits number 1 make up this analogue multiplexer. ADG608 can be used to search for analog multiplexer variants. It has an internal resistance of 100Ohm. Datasheets for 16 pin functions are available upon request. In normalcircumstances, users should not exceed 6.5V volts for the multiplexer. There should be 3V voltage fed to the electrical part below 3V. For this multiplexer to operate, 50nA current would be sufficient. Despite this switch's dual supply capability, its voltage should not exceed 6.5V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. There is a voltage range of 5.5V operating voltages for the electrical part. There are 8 inputs to be operated. Don’t miss additional features of the electronic component such as: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE.

ADG608BRUZ-REEL7 Features

8 Channels
50nA Supply Current
Additional Features: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE

ADG608BRUZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG608BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

• SONET/SDH ADM
• Private Branch Exchange (PBX)
• PDH Multiplexers
• Medical Instrumentation
• Battery Powered Systems
• Video signal routing
• DSUs
• Ultrasound
• New designs requiring multiplexer functions
• Fiber In The Loop (FITL)