Due to its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. A total of 10 terminations have been recorded. The electronic part delivers high-quality output through its 2 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. Electronic part bodies are injected with 10 pins. SPST - NO/NC switching circuits are used in these analog switch ics. ADG623 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 5.5Ohm. You can find the functions of the 10 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. In order for the electronic part to function properly, the lowest voltage should be 2.7V. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5.5V. If you are using a dual power supply, you should attach at least 2.7V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.