ADG658YRQZ Overview

Packed in 16-SSOP (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~125°C TA. There are 16 terminations totally. By its 8 channels, the electronic component provides high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. This electronic part can be found in the 16 series. It consists of 1 circuits. Try searching with ADG658 if you're looking for variants. Internally, this switch multiplexer has a resistance of 75Ohm. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. 2V is the lowest voltage that should be fed to the electronic electronic part. Despite this switch device's dual supply capability, its voltage should not exceed 6V. If you are using a dual power supply, you should attach at least 2V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. There is a voltage range of 5V operating voltages for the electrical part. Among the inputs that can be operated are the 8 inputs. There are 210MHz bandwidths for data transfer. This electronic component presents a Drain to Source resistance of 75Ohm.

ADG658YRQZ Features

8 Channels
Bandwidth: 210MHz
Drain-to-Source resistance: 75Ohm

ADG658YRQZ Applications

There are a lot of Analog Devices Inc. ADG658YRQZ Analog Switches & Multiplexers ICs applications.

• SDH/SONET multiplexers
• Channelized and Unchannelized DS3 applications
• CSU
• Fault Tolerant Systems
• 65 V DACs
• Mechanical reed relay replacement
• DSUs
• Communications systems
• FTTH
• Microprocessor Controlled Analog Systems