ADG659YRQ-REEL7 Overview

As the electronic part is packed in 16-SSOP (0.154, 3.90mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. 4:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -40°C~125°C TA are extended for operation. There are 16 terminations totally. A high-quality output is provided by the electrical component's 4 channels. An 5V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Multiplexers built on a SP4T switching circuit are built. Circuits number 2 make up this analogue multiplexer. Using the ADG659 search parameter, you can discover variants of the switch. It has an internal resistance of 75Ohm. You can find the functions of the 16 pins in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 12V. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2V. It would be sufficient to run this analogue multiplexer with 10nA current. There is no problem with using dual supply voltage, but it should not exceed 6V. You should attach at least 2V voltage if you are using dual power supply. 5V operating voltages are supported by the electronic component. The transfer of data can be performed over 400MHz bandwidths.

ADG659YRQ-REEL7 Features

4 Channels
Switch Circuit: SP4T
10nA Supply Current
Bandwidth: 400MHz

ADG659YRQ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG659YRQ-REEL7 Analog Switches & Multiplexers ICs applications.

• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• HDTV
• Channel Banks
• Communication systems
• High reliability control systems
• PBXs
• Audio/video switches
• Ultrasound
• New designs requiring multiplexer functions
• Imaging