ADG659YRQZ Overview

As the electronic part is packed in 16-SSOP (0.154, 3.90mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Operating temperature extended to -40°C~125°C TA. In total, there are 16 terminations. By its 4 channels, the electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. There is an electrical component included in the 16 series. Circuits based on SP4T switching are used to construct these analog switch ics. There are 2 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with ADG659. As far as internal resistance is concerned, it has 75Ohm. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 12V voltage to the switch device. The lowest voltage the electronic part should receive is 2V. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. If you are using dual power supplies, you should attach at least 2V. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. Operating voltages of 5V are compatible with the electrical part. Among the inputs that can be operated are the 8 inputs. It is possible to transfer data over a 400MHz-bandwidth.

ADG659YRQZ Features

4 Channels
Switch Circuit: SP4T
Bandwidth: 400MHz

ADG659YRQZ Applications

There are a lot of Analog Devices Inc. ADG659YRQZ Analog Switches & Multiplexers ICs applications.

• Audio and video routing
• Microprocessor controlled systems
• Routers
• HDTV
• Channel Banks
• High speed data transmission line cards
• Communications systems
• Multi-Line E1 Interface Cards
• Channelized and Unchannelized DS3 applications
• Central office